Wednesday, August 16, 2023

[GUIDE] QDLoader 9008 fix | EDL Mode fix

 Hi everyone,

If your phone does not react on any of yours actions. You may have the same problem. This is an instruction how to fix it.

If you have a last version of Windows 10 you can easily check if it is your case (You will have "Qualcomm HS-USB QDLoader 9008" device at your Windows devices' list.


How to Fix:

1. Download Drivers Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip  // Link 02 and install it.

2. Download firmware link1 or link2

3. Install the driver

4. Unpack a firmware archive

5. Power off your phone by pressing Voice Down + Power Buttons (If your phone would be in this state too long the script would not works).

6. Start update_image_EDL.bat script - it will recreate all of the partitions

7. After the script will finish you will see the bootloader

8. Start script flashall_AFT.cmd - it will install firmware to the new partitions

9. Download fresh official firmware from asus site and put the archive at your memory card.

10. Start bootloader

11. Go to a standard recovery mode and install this firmware form the card

12. restart and repeat 10-11 (it will install software at the second state)

13. The problem is fixed. Congratulations!


Common problems:

Exception: System.DLLNotFoundException: DLL "QMSL_MSVC10R.dll": Module was not found. (HRESULT: 0x8007007E) can not be loaded.

Solution: You need to install Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package MFC. Thanks to Genim


No comments:

Post a Comment